THERMOLASER 22-6

Plus d'information

Microplex

The THERMOLASER 22-6 from Microplex is a multifunctional non-impact printer based on thermal print technology.
The device can be used for thermal transfer printing as well as for thermal direct printing. Because of its wide range of application, you can use them to print all kind of information as barcodes,
alphanumerical characters and vector graphics e.g.
This printer not only know one device-specific page description language as standard thermal printers usually do, but most of the languages used in the industrial field and the well-known market
standards of laserprinters, too.
All printers of the THERMOLASER 22 series are provided with a controller that is also used in SOLID laserprinters. So the advantages of the thermal print technology are combined with the flexibility of the “laserprinter intelligence”.
For the printers of the THERMOLASER 22 series a software (called IP printADMIN) will be available to allow a printer configuration via Ethernet. The controller has its integrated website with information
on the printer status and the printjob status.
Data can be sent without programming expenditure from almost any software platform, because printer drivers are already available for this.
The capabilities featured include the MICROPLEX page description language IDOL. Using this language, complex tasks such as the creation of forms can be carried out by simple software commands (see separate IDOL manual).
The resolution is 300 dots per inch corresponding to about 12 dots per mm.
The print speed is 50 up to 150 mm/second.
Roll-fed media as well as continuous-media can be printed on.
The maximum processable width of media for the THERMOLASER 22-6 is 174 mm. 168 mm of that are printable.

Demande d'information
© 2018 PRESA | Disclaimer | Conditions générales
En poursuivant votre navigation sur ce site, vous acceptez l'utilisation de cookies pour vous produire un contenu mieux adapté à vos besoins.
Les données ne seront pas communiquées à des tiers.
OK